99 4171 00 08 | binder Automatisierungstechnik M16 Kabelstecker, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67

Menu

Menu

Products
Automation technology - Data transmission
M16-X
M16 Male cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67

Illustration 99 4171 00 08 - M16 Male cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67 — Illustration

3D View 99 4171 00 08 - M16 Male cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67 — 3D View

Scale drawing 99 4171 00 08 - M16 Male cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67 — Scale drawing

Assembly instructions 99 4171 00 08 - M16 Male cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67 — Assembly instructions

Contact arrangement (Plug-in side) 99 4171 00 08 - M16 Male cable connector, Contacts: 8, 5.5-9.0 mm, shieldable, IDC, IP67 — Contact arrangement (Plug-in side)

Part no.	99 4171 00 08
Connector design	Male cable connector
Version	Connector pin straight
Connector locking system	screw
Termination	IDC
Degree of protection	IP67
Cross-sectional area	AWG 24-22/1, AWG 27-22/7
Cable outlet	5.5-9.0 mm
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	62.41
Customs tariff number	85366990
Country of Origin	TW

Rated voltage	50 V (AC) / 60 V (DC)
Rated impulse voltage	800 V
Rated current	0.5 A
Insulation resistance	> 10⁸ Ω
Pollution degree	3
Overvoltage category	II
Insulating material group	II
EMC compliance	shieldable
Shield connection	Shield clamping

Housing material	Zinc die-cast nickel-plated
Contact body material	PA (UL94 V-0)
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	668951be-56d8-4922-9b30-e5873efaef8f

eCl@ss 11.1	27-44-01-02
ETIM 9.0	EC002635

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).

Downloads

Data sheet 99 4171 00 08

CAD files

Select required format