Name: M8
Brand: binder
SKU: 79 3411 45 04

Illustration 79 3411 45 04 - Male cable connector, PVC, black, 4 x 0.25 mm² — Illustration

3D View 79 3411 45 04 - Male cable connector, PVC, black, 4 x 0.25 mm² — 3D View

Part no.	79 3411 45 04
Connector design	Male cable connector
Weight (g)	0.00
Customs tariff number	85444290
Country of Origin	DE

Moreless

REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	0d04855d-9a9e-4b94-aee3-dbddcb516e39

Moreless

ETIM 9.0	EC002638

Moreless

Structure of the cable
Cable diameter	4.5 mm
Cross section	4 x 0.25 mm²
Sheath material	PVC
Single-lead insulation	PVC
Single-lead structure	32 x 0.10 mm
Cable color	black
Electrical properties
Conductor resistance	79.9 Ω/Km (20°C)
Mechanical properties
Bending radius, fixed cable	≥ 5 x Ø
Bending radius, moving cable	≥ 10 x Ø
Bending cycles	> 5 million
Thermal properties
Temperature range cable in move from/to	-5 °C / 70 °C
Temperature range cable fixed from/to	-25 °C / 70 °C
Other features
Halogen free	no

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 40 cNm).

Downloads

all (PDF)

Data sheet

Data sheet 79 3411 45 04