09 4840 00 14 | binder Miniatur Push Pull Flanschdose, Contacts: 14, shieldable, solder, IP67

Menu

Menu

Products
Miniature connectors
Push-Pull IP67
Push Pull Female panel mount connector, Contacts: 14, shieldable, solder, IP67

Illustration 09 4840 00 14 - Push Pull Female panel mount connector, Contacts: 14, shieldable, solder, IP67 — Illustration

3D View 09 4840 00 14 - Push Pull Female panel mount connector, Contacts: 14, shieldable, solder, IP67 — 3D View

Component part drawing 09 4840 00 14 - Push Pull Female panel mount connector, Contacts: 14, shieldable, solder, IP67 — Component part drawing

Scale drawing 09 4840 00 14 - Push Pull Female panel mount connector, Contacts: 14, shieldable, solder, IP67 — Scale drawing

Assembly instructions / Panel cut-out 09 4840 00 14 - Push Pull Female panel mount connector, Contacts: 14, shieldable, solder, IP67 — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 4840 00 14 - Push Pull Female panel mount connector, Contacts: 14, shieldable, solder, IP67 — Contact arrangement (Plug-in side)

Part no.	09 4840 00 14
Connector design	Female panel mount connector
Version	Connector socket straight
Connector locking system	Push-Pull
Termination	solder
Degree of protection	IP67
Cross-sectional area	0.25 mm² / AWG 24
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 1000 Mating cycles
Weight (g)	20.74
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	60 V
Rated impulse voltage	500 V
Rated current	3,0 A
Insulation resistance	≥ 10¹⁰ Ω
Pollution degree	1
Overvoltage category	I
Insulating material group	III
EMC compliance	shieldable
Shield connection	Shield on the housing

Contact body material	PBT (UL94 V-0)
Contact material	CuSn (bronze)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	0ff2c816-2d8e-44dd-b781-c70a7f09616f

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".

Downloads

Data sheet 09 4840 00 14

CAD files

Select required format